Precision-manufactured MS Angles (40×40 to 150×150 mm) and MS Channels (75×40 to 150×75 mm) under ISI certification norms. Brand DATA — Mandi Gobindgarh, Punjab. Supplying pan-India and worldwide.
Data Udyog was founded in 2020 in Mandi Gobindgarh — Punjab's steel city — with one clear purpose: to manufacture MS Angles and Channels that builders, fabricators, and engineers across India could trust completely. Not just trust in terms of quality, but trust in terms of consistency, documentation, and delivery.
What started as a focused manufacturing unit has grown into one of the region's most credible ISI-certified steel producers. In just four years, Data Udyog has built a plant spanning 1,25,000 Sq.Ft., employs over 100 skilled workers, and manufactures 3,000 MT of steel sections every month — supplying every state across India.
We are a unit of Mahawar Group — a group with roots going back to 1991 in Mandi Gobindgarh. That heritage of trust, combined with modern manufacturing technology, is what defines how we work every single day.
In 2026, Data Udyog received the ZED Gold Certification from the Ministry of MSME, Government of India — the highest tier in the Zero Defect Zero Effect scheme. This is not just a certificate. It reflects the discipline of 200 people who show up every day and do their job right.
We manufacture MS Angles & Channels at our Mandi Gobindgarh plant. We stock & supply MS Flat Bars, Square Bars, and Round Bars. Hover any card to see full specs.
Equal-leg · IS:2062 E250 & E350 · 40×40 to 150×150 mm
75×40 · 100×50 · 125×65 · 150×75 mm · L/H/SL
12–450 mm wide · 3–25 mm thick · IS:2062
6×6 mm to 50×50 mm · IS:2062
6 to 100 mm dia · IS:2062/IS:1786
From ISI-certified structural steel sections manufactured at our Mandi Gobindgarh plant to a complete range of stocked steel products and group company services — Data Udyog and Mahawar Group cover every steel requirement.
9 precise steps at our Mandi Gobindgarh plant — from raw IS:2062 billets to ISI-marked sections dispatched pan-India and worldwide.
100×100 to 130×130 mm MS billets from SAIL, JSW, RINL. Every batch spectrometer-tested for C, Mn, Si, S, P. Only IS:2062 E250 compliant billets enter production.
Billets heated to 1,100–1,250°C through 3 zones: preheating, heating, soaking. 45–90 min for uniform core-to-surface temperature. Once orange-yellow, rushed to rolling within seconds.
3–6 progressive passes reduce 100×100 mm billet to a thinner transfer bar. Rolling pressure refines grain structure and eliminates internal porosity.
L-shaped grooved rolls form the MS Angle at exactly 90°. U-shaped grooves form the MS Channel. 4–6 finishing stands monitor IS:808 dimensions in real time.
Sections cool from ~850°C to ambient on an 80–150 m bed. Achieves tensile ≥410 MPa, yield ≥250 MPa, elongation ≥23%.
Multi-roll straightener applies controlled reverse bending, restoring perfect straightness. IS:808 max: 1 mm bow per metre.
Sections cut to 6 m or 9 m standard lengths — clean burr-free cuts at right angles. ±100 mm tolerance per IS. Crop ends recycled — zero waste.
Every batch: Tensile ≥410 MPa · Yield ≥250 MPa · Elongation ≥23% · 180° Bend Test · Dimensional check per IS:808. Full MTR with every lot.
Sections bundled 1.5–5 MT by size and heat number. ISI mark stamped on every section during rolling — BIS mandate. MTR with every lot. Pan-India and worldwide delivery.
A 1,25,000 Sq.Ft. manufacturing facility in the heart of Mandi Gobindgarh — Punjab's steel city. 100 skilled workers. Modern rolling mill technology. Every section made right here.
Data Udyog's manufacturing facility is located in Mandi Gobindgarh — India's largest hub for secondary steel production. The plant is spread across 1,25,000 Sq.Ft. and houses a complete rolling mill setup from raw billet storage to finished product dispatch. Every square foot of this plant is designed for one purpose: producing ISI-certified MS Angles and Channels without compromise.
The plant operates single and double shifts with over 100 skilled workers — rollers, operators, quality inspectors, logistics staff, and maintenance engineers — all of whom are trained specifically for structural steel manufacturing.
No section leaves our plant without passing through our in-house testing lab. Every heat number is tested before dispatch and a full Material Test Report (MTR) is issued — mandatory for ISI certification and expected by serious buyers.
The quality of finished steel begins with the quality of the raw material. We source 100×100 mm to 130×130 mm MS billets exclusively from India's most trusted primary steel producers — SAIL (Steel Authority of India), JSW Steel, and RINL (Vizag Steel). No secondary or unknown-source billets enter our plant.
Data Udyog maintains a large finished goods stock at our Mandi Gobindgarh plant. We manufacture 3,000 MT of MS Angles and Channels every month, and supply 5,000 MT monthly — including our own manufactured sections plus stocked MS Flat Bars, Square Bars, and Round Bars from trusted sources.
India's infrastructure growth is demanding larger structural steel sections. Data Udyog is expanding its production line to manufacture heavier and wider sections — bringing capabilities to Mandi Gobindgarh that will serve India's biggest construction, industrial, and export requirements.
Data Udyog is a proud unit of Mahawar Group — 5 companies in Mandi Gobindgarh serving India's steel, roofing, and pre-engineered building sectors since 1991.
Data Udyog supplies ISI-certified MS Angles and Channels across every state in India and internationally. ZED Gold certification and 3,000 MT monthly production make us a reliable partner for buyers anywhere.
Enquire for Bulk Supply →Punjab, Haryana, UP, Himachal Pradesh, J&K, Rajasthan, Maharashtra, Delhi NCR and all states. Regular bulk dispatches.
ISI certification and ZED Gold standards meet international buyer requirements across Middle East and Southeast Asia.
Full documentation: MTR, Certificate of Origin, packing list, and quality certificates for every international shipment.
3,000 MT manufactured + 5,000 MT supplied monthly. Direct from manufacturer — competitive pricing, no middlemen.
Data Udyog exports ISI-certified MS Angles and Channels to international buyers. Our ZED Gold certification, IS:2062 E250 & E350 grades, and complete documentation make us a trusted steel supplier for global projects.
Every section under IS:2062 E250 — min. yield 250 MPa, tensile 410 MPa. Proven load-bearing for structural and heavy industrial applications.
Rolled to tight tolerances per IS:808 — consistent cross-sections batch after batch. Eliminates on-site waste, rework and misfits.
Direct manufacturer — no middlemen. 3,000 MT monthly production gives competitive bulk pricing with priority dispatch from Mandi Gobindgarh.
ZED Gold certified by Govt. of India — near-zero defects and minimal environmental impact. Consistent quality, every order, without compromise.
Same business day response — our sales team will contact you with the best bulk pricing.
75084-00079 · 90760-25558
What is happening in India's steel and construction industry — and how it affects buyers, builders, and fabricators.
Data Udyog is an ISI Certified and ZED Gold manufacturer of MS Angles (40–150 mm) and MS Channels (75–150 mm) located in Mandi Gobindgarh, Punjab — India's steel manufacturing hub. Established in 2020 as a unit of Mahawar Group (Est. 1991), our 1,25,000 Sq.Ft. plant employs 100+ skilled workers and produces 3,000 MT of structural steel sections every month. We supply to all 28 states of India and export worldwide. Every section we manufacture carries the ISI mark — backed by full Material Test Reports, ISO 9001:2015 quality management, and the highest ZED Gold certification from the Ministry of MSME, Government of India. Our owners — Jagmohan Data, Suneel Kumar Data, and Pardeep Kumar Gupta — bring decades of steel industry experience to every tonne we produce. Data Udyog's own annual turnover stands at ₹2.5 to 3 Billion — making it one of the most significant structural steel manufacturers in Punjab.
